Q1
What parts should be paid attention to in the annual maintenance of equipment
1.Change the parts as manual;
2.Record the maintenance details;
3.Record the situation doing production to provide a reference.
Q2
Ago it was normally,but the reject percentage is increasing,what are the reasons
1.Whether some part is adjusted;
2.Whether some difference between the caps;
3.Whether do maintenance of the equipment;
4.Whenther some part will being broken.
Q3
What are the resons cause the closure jam during running
1.check the whether the power is changed,such as the air blower filter,the compress air valve;
2.Chech whether the deformation caps go inside the track;
3.Due to long time using whether position moved between the connection area.
Q4
What need to be done if the system change another kind of closure
1.if the shape is the same only need to adjust the height and width,the sapce between the guard to the cap is about 1.5-2mm;
2.If the shape is not the same need to redesign.
Q5
What need to be done if the original conveyors need to be moved
Due to the standard design of the conveyor,only base on the new layout to disassembly and re-assembly the conveyors’ parts,if not enough only buy that parts.
